სამედიცინო დახმარება

In given situation, is the driver of a light vehicle, when moving according to the arrows, required to stop at the crossing from the intersection when the traffic lights is turned to the moving prohibiting signal?

1. 1 Yes
2. 2 No

For removal of foreign body in repiratory tract of the person injured after an accident, we have to:

1. 1 Push his/her the back for several times, in case of negative result, stand behind the injured, make the fists near abdomen at lower rib level, press the ribs simultaneously and press heavily on abdominal area in upper and lower directions
2. 2 Lay the injured on his/her knees, with his/her face down and push the fist on the back for several times

Is giving of medicines to the unconscious person injured after an accident allowed?

1. 1 No
2. 2 Yes

If material for making the first-aid strip for hand bone fracture of the person injured after a traffic accident is not available, it is essential to:

1. 1 Hang the hand bent in elbow and fix it to the body with gauze bandage
2. 2 Tighten the straightened hand to the body with gauze bandage

During work period, on what distance should be an extraneous person from a workplace?

1. 1 2 m
2. 2 10 m
3. 3 15 m
4. 4 5 m

During repairing, on what distance should be an extraneous person?

1. 1 10 m
2. 2 5 m
3. 3 1.5 m
4. 4 2 m

Work under a high voltage is admitted if the distance between the high point of the escalator and voltage wire is not less than:

1. 1 10 m
2. 2 2 m
3. 3 5 m
4. 4 1.5 m

The escalator shall be equipped with:

1. 1 None of the given answers in the test is true
2. 2 Both medical box and fire equipment
3. 3 Fire equipment only
4. 4 Medical box only

Should the tractor-driver know or not the traffic rules?

1. 1 It is not necessary
2. 2 Yes

When the required transmissions should be switched on for motion of the bulldozer on the inclined surface?

1. 1 Before starting motion on the inclined surface
2. 2 During motion on the inclined surface

During maneuvering of the bulldozer in limited area or overcoming the slope:

1. 1 Shaft rotation frequency should be increased
2. 2 Shaft rotation frequency should be reduced

Operation of the bulldozer is not allowed, if:

1. 1 Wing elevation and ground handling in case of longitudinal slope is more than 20°
2. 2 Wing elevation and ground handling in case of longitudinal slope is more than 15°
3. 3 Wing elevation and ground handling in case of longitudinal slope is more than 30°

Operation of the bulldozer is not allowed, if:

1. 1 Operation on the slope during parallel inclination is more than 16°
2. 2 Operation on the slope during parallel inclination is more than 24°
3. 3 Operation on the slope during parallel inclination is more than 20°

Is admissible or not the implementation of turn with deep bulk of bulldozer ripper teeth?

1. 1 Yes
2. 2 No

How many hours after does the first technical service of the bulldozer working held?

1. 1 After 75 hours working.
2. 2 After 40 hours working
3. 3 After 50 hours working

How many hours after does the second technical service of the bulldozer working held?

1. 1 After 250 hours working
2. 2 After 350 hours working
3. 3 After 300 hours working

How many hours after does the third technical service of the bulldozer working held?

1. 1 After 1000 hours working
2. 2 After 750 hours working
3. 3 After 500 hours working

Is transportation of the bulldozer available?

1. 1 By road transport only
2. 2 By rail transport only
3. 3 Through any means listed in given test
4. 4 By self-propelling only

Availability term of the machine is:

1. 1 The period of time between seasonal maintenance services
2. 2 Its moral deterioration term
3. 3 Calendar duration of machine exploitation until the point, when parameters defined by its technical documentation reaches the limit value
4. 4 Car service warranty period

Maintenance service of the vehicle represents the certain set of operations:

1. 1 Performance of which is necessary in order to increase the vehicle reliability
2. 2 Performance of which ensures preservation of the vehicle operability
3. 3 Through which durability of vehicle increases
4. 4 Performance of which is necessary for preparation of the vehicle for operation